Tamper resistant receptacles were first required by the 2008 edition of the National Electrical Code (NEC). They are recognizable by the “TR” embossed on the face at the plug insertion area, and the closure shutter that obstructs the opening in the slots just behind the face for the hot and neutral slots. The purpose of the code requirement is to prevent children from probing the holes with small objects and, with these receptacles installed, it is not necessary for parents of young children to use outlet plug covers to child-proof them. Go to our blog post What locations are exempt from the tamper resistant receptacle requirement by code?  for where they are not necessary.

    Unfortunately, the shutter mechanism on these child-proof receptacles can be a little stiff when the receptacle is new, and applying uneven pressure or pressing from an angle will not activate the release mechanism—which is why they are also adult-proof until you get used to them. Trying to insert a cord with damaged or bent prongs can be a problem too. 

    While the year that the NEC added a new requirement is easy to define, each local juridiction’s building codes don’t necessarily adopt the latest edition of the NEC immediately. The state of Florida, for example, did not make the 2011 NEC effective until mid-2015. Other jurisdictions have sometimes waited even longer to adopt a newer NEC edition and, to complicate things further, they might make amendments that exclude parts of the newest requirements. So the year when the NEC first adds or changes a requirement can be several years before your local building department adopted that edition of the code and began enforcing it.

• • • • • • • • • • • • • • • • • • • • • • • • • • • 

  To learn more about electrical wiring, devices, and receptacles, see these other blog posts:

 • What is the difference between what trips a GFCI (ground fault) receptacle and a circuit breaker?

• What is the code requirement for GFCI protection for receptacles near a wet bar sink? 

• What is the requirement for a service receptacle outlet for heating, air conditioning, and refrigeration (HACR) equipment? 

• Why is an opening in the wall around the side of an electrical receptacle outlet a safety defect?  

• When was GFCI-protection for kitchen dishwasher receptacle outlet first required? 

• What is allowable voltage range at a wall receptacle outlet in a house?

• When should I replace electric receptacle outlets? 

• Does an electric receptacle outlet in a storage shed require GFCI protection? 

• What are "self-contained" electrical receptacle outlets and switches?

• What is the difference between an electrical receptacle, an outlet, and a plug?

• Does a washing machine receptacle outlet require GFCI protection?

• What is the building code requirement for receptacle outlets at stairs and stair landings?

• Can I remove a 240-volt range receptacle and hard-wire the range? 

• What is a "backstab" receptacle outlet? 

• Why are some electric receptacle outlets upside down (ground slot up) in a house?   

• What is the height requirement for an electric receptacle outlet? 

• Where are GFCI receptacle outlets required?

• When were GFCI receptacle outlets first required?

• Does a home inspector remove receptacle outlet cover plates?

• What is the minimum height for an exterior receptacle outlet? 

• When was the current receptacle/outlet spacing of 12-feet first required? 

• When was the three-slot (grounding) outlet/receptacle first required? 

• Why does painting an electric receptacle (outlet) make it unsafe?

• Why are electrical outlets and plugs polarized? 

• How many electrical receptacles (outlets) are required in a hallway?  

• What problems does having too many electric receptacle outlets on a single circuit cause? 

• Is a house required to have outdoor electric receptacle outlets?

• How I can tell if a receptacle outlet is tamper resistant?

• Why is there a GFCI breaker in the electric panel for the bathroom shower light and exhaust fan?

• What is a false ground, bootleg ground, or cheated ground receptacle? 

• How can adding wood paneling or a wainscot create an electrical safety hazard?

• How can I figure out what a mystery wall switch does?

• How far apart should kitchen counter receptacles be spaced?  

• How far above a kitchen countertop do electrical outlets have to be?

• What is reversed polarity at an outlet/receptacle? Why is it dangerous? 

• How high above the floor do electric outlets/receptacles in a garage have to be?

• How far apart should electric receptacles be spaced in a bathroom? 

• Is an ungrounded electric receptacle outlet dangerous?

• My bathroom electric receptacle/outlet is dead and there are no tripped breakers in the electric panel. What's wrong?  

• Is there an adapter that can be placed on a two-slot receptacle to make it safe? 

• Why is there no bathroom electric receptacle in this old house?

• How can I tell if the electric receptacle outlets are grounded? 

• How far apart should the electrical receptacles be placed?

• What are the most common problems/defects found with electric receptacle outlets during a home inspection?

   Visit our ELECTRICAL page for other related blog posts on this subject, or go to the INDEX for a complete listing of all our articles