How To Look At A House
McGarry and Madsen's home inspection blog for buyers of
site-built, mobile/manufactured and modular homes
How do I determine the age of a Westinghouse electrical panel?
Saturday, December 4, 2021
The third number of the serial number stamped on the data sticker of a Westinghouse electrical panel is the single-digit year of manufacture, and the first two numbers are the week. Because the decade is not provided, it must be figured out from other observations. See our article How do I determine the age of an electrical panel? for ways to find clues for the approximate age.
This panel was in a mobile home built in February of 1990, and that’s how we determined that it was 1989. Because production of Westinghouse panels was discontinued in 1995, the manufacture date must be earlier than that.
Not all Westinghouse panels will have this number stamp. Some have a letter sequence that we have been unable to decipher.
Here’s links to a collection of our other blog posts about ELECTRIC PANELS:
• What causes copper wires to turn green or black in an electric panel?
• What is the maximum number of circuit breakers allowed in an electric panel?
• When should a corroded or damaged electric panel cabinet or disconnect box be replaced?
• What is a tandem circuit breaker?
• When did arc fault circuit interrupter (AFCI) breakers first become required?
• Can an electric panel be located in a closet?
• Can an electric panel be located in a bathroom?
• Can you add circuit breakers by different manufacturers to an electric panel if they fit?
• My circuit breaker won't reset. What's wrong?
• What is a split bus electric panel?
• How do I identify a combination AFCI (CAFCI) circuit breaker?
• What does a circuit breaker with a yellow or white test button indicate?
• What are the requirements for NM-cables entering an electric panel box?
• Why is a fuse box/panel an insurance problem for homebuyers?
• Why is bundled wiring in an electric panel a defect?
• What is the difference between GFCI and AFCI circuit breakers?
• Why are old electrical components not always "grandfathered" as acceptable by home inspectors?
• What happens when you press the "TEST" button on a circuit breaker in an electric panel?
• What is a Dual Function Circuit Interrupter (DFCI)?
• What is the difference between "grounded" and "grounding" electrical conductors?
• What does it mean when a wire is "overstripped" at a circuit breaker?
• Why is an old fuse panel dangerous?
• Who is the manufacturer of those "bad" electric panels?
• Why is the circuit breaker stuck in the middle?
• What is a double tap at a circuit breaker?
• What is the right electric wire size for a circuit breaker in an electric panel?
• What is the life expectancy of a circuit breaker?
• My circuit breaker won't reset. What's wrong?
• Why do some breakers in my electric panel have a "TEST" button on them?
• What is the right size electric panel for a house?
• What do I need to know about buying a whole house surge protector?
• What is the maximum allowed height of a circuit breaker (OCPD) above the floor?
• What is the maximum height you can mount an electric panel above the floor?
• What is the code required clearance in front of an electric panel?
• What is the main bonding jumper and where do it find it in an electric panel?
Visit our ELECTRIC PANELS page for other related blog posts on this subject, or go to the INDEX for a complete listing of all our articles.
Click Below
for Links
to Collections
of Blog Posts
by Subject
Top 5 results given instantly.
Click on magnifying glass
for all search results.
Search
This
Site
Buying a home in North/Central Florida? Check our price for a team inspection by two FL-licensed contractors and inspectors. Over 8,500 inspections completed in 20+ years. In a hurry? We will get it done for you.
